Product Description
Available Diameters |
2.3mm |
Length |
1m, 2m,3m, 5m |
Available colors |
White / Ice blue/Orange/Pink / Green / Yellow /Lemon/Purple/blue/red |
EL Wire types |
EL Wire / EL chasing wire |
Materials |
Plastic tube, luminescent material inside |
Function of Inverter |
On/off |
Brightness |
High brightness with attractive light |
Features |
Polar wire, water proof, protecting by end up |
Certificates |
CE |
Application |
House, cars, street, mall decoration, night clubs, parties, dark hallways,
|
Working voltage |
DC12V to DC240V |
Working frequency |
50Hz to 5,000Hz |
Working Temperature |
(-40 to +80) °C |
Lifetime |
12000 hours |
Packet including:
1 x EL wire
1x 12V Cigarette lighter drive
Instructions for use:
Cold light must be connected with the drive to use, and can not be connected directly to the power supply.
Cold light can use double-sided tape or glue fixed and then in the car.
Cold light can cut use, cut the part can be discarded, ownership length does not affect the use of the remaining part of the.
If you can not use after cutting, because cutting lead to short circuit, so you once again cut a small part is OK
Note: We send the drive to you with Cigarette lighter pulg (Working through the cigarette lighter),
If you want to connect to the car interior Arbitrarily, you can cut the tail of Cigarette lighter so that line Interface can connect the 12V
But you should know Automotive interior wire
*Note *
When this power inverter works, t will make a little buzz hum sound.
It is a normal situation, it doesn't bother you! please inform that.
Installation
Installation Notes:
(New) band edge cold light "cold light with the side! The product does not require glue, plug directly into the side door or in the gap in the dashboard, trouble-free installation!
Do not worry posted after traces of glue, is preferred independent owners installed! each cold light all with independently driven, free connection lights interface can cut excess or hidden inside the trim panel
Light bar diameter 2.3MM, 5MM with sewing edge, the installation more convenient (console that plugs directly into the slit edges, no gum paste)
Note buy:
According to the different decoration,
The car console needs 2~5 meters, Each door needs 1~2 meters.